The First-Time Buyer’s Guide to Radon Testing in Arvada and Colorado
Executive Summary: Because of its unique, uranium-rich geology, Colorado has naturally elevated radon levels, with roughly half of all homes testing above the EPA’s action level. A professional, 48-hour radon test provides critical data during your home buying process, helping you determine if specialized mitigation is necessary.
Buying your first home in the Greater Denver Metro Area is an exciting milestone. However, along with navigating the competitive market, Colorado buyers must also navigate our unique local environment. From managing expansive soils to preparing for Front Range freeze-thaw cycles, our homes face distinct regional challenges
.
One of the most invisible, yet important, environmental factors in our state is radon gas. At Maple Home Inspections, LLC, we frequently speak with first-time buyers in Arvada and Jefferson County who are hearing about radon for the first time.
This guide will explain why radon is prevalent in Colorado, how testing works, and what your results may suggest for your new home.
Why Colorado Has Elevated Radon Risk
Radon is a naturally occurring, odorless, and colorless radioactive gas. It is produced by the natural breakdown of uranium in soil, rock, and water.
Due to the mineral-rich geology of the Rocky Mountains and the Front Range, Colorado soil contains higher-than-average amounts of uranium. Consequently, the Colorado Department of Public Health and Environment (CDPHE) notes that all 64 counties in Colorado are considered at high risk for elevated radon.
In Arvada and surrounding Jefferson County, radon gas can slowly seep into homes through foundation cracks, crawlspaces, and structural gaps. Because modern homes are built tightly for energy efficiency, this gas can become trapped indoors.
How Professional Radon Testing Works

During your due diligence period, adding a radon test to your home inspection is highly recommended. The standard real estate radon test is a short-term test that typically takes 48 hours.
For the most accurate snapshot, the home must be kept under "closed-house conditions." This means keeping all exterior doors and windows closed as much as possible for 12 hours prior to and during the testing period.
At Maple Home Inspections, LLC, we utilize highly calibrated Continuous Radon Monitors (CRMs). These advanced devices take hourly readings, which helps detect unusual fluctuations and ensures the testing environment has not been compromised.
Common Radon Test Types Compared
Test Type | Duration | Typical Use Case | Accuracy / Features |
Continuous Monitor (CRM) | 48+ Hours | Real estate transactions | High; provides hourly data and detects tampering. |
Charcoal Canister | 2-7 Days | Personal, low-cost screening | Basic; requires mail-in lab analysis. |
Understanding Your Radon Results

Once the 48-hour testing period is complete, we generate a detailed report. Radon is measured in picocuries per liter of air (pCi/L).
The Environmental Protection Agency (EPA) has set an "action level" at 4.0 pCi/L. If the home tests at or above this level, the EPA recommends taking action to reduce it. Levels between 2.0 and 4.0 pCi/L may also warrant consideration for mitigation, depending on your personal comfort level.
It is important to remember that a radon test provides a snapshot in time. Because radon levels can fluctuate with seasonal weather and barometric pressure changes, periodic monitoring is often a wise practice even after you move in.
Inspector's Pro Tip: Trust a Licensed Professional
Not all radon tests are conducted equally. To ensure you receive accurate, reliable data, it is crucial to hire a qualified professional.
At Maple Home Inspections, LLC, our operations are led by David Meixell, a Colorado State Licensed Radon Professional (License RME.0000540). This credential requires rigorous training, state-approved exams, and strict adherence to quality assurance protocols.
By choosing a licensed professional, you gain peace of mind knowing your test is conducted to the highest industry standards, providing you with objective data to make informed purchasing decisions.
Frequently Asked Questions (FAQ)
Is a radon test required to buy a house in Colorado? No, radon testing is not legally mandated for purchasing a home in Colorado. However, given the state's geology and elevated risk levels, most real estate agents and home inspectors highly recommend it during the inspection contingency period.
Can I fix a house with high radon levels? Yes. If a home tests high for radon, it typically can be managed. You should consult with a licensed radon mitigation contractor.
How long does a professional real estate radon test take? A professional short-term radon test using a continuous monitor typically takes a minimum of 48 hours to complete. Fast results are usually available the same day the test concludes.
Schedule Your Arvada Home and Radon Inspection Today
Knowledge is your most valuable asset when buying a home. Identifying elevated radon levels before closing allows you to negotiate repairs or budget for future mitigation with clarity.
At Maple Home Inspections, LLC, we are committed to providing you with thorough, objective, and licensed evaluations. If you are buying a home in Arvada, Denver, or the surrounding communities, let our expertise guide your journey.
[Contact Maple Home Inspections, LLC today to schedule your home inspection and professional radon test.]
Disclaimer: The information provided in this article is for educational purposes only and does not constitute structural engineering, legal, or specialized contractor advice. Every home is unique. A general home inspection is a visual, non-invasive evaluation of a home's condition at the time of inspection. Always consult with qualified, licensed specialists for specific repairs or structural evaluations.



Comments